KitchenAid KDTF924PPS Owners Manual - Page 26

Option A: Waste disposer - no air gap A D C Option B: No waste disposer - no air gap D C A B A. Disposer inlet B. Drain trap C. Drain hose D. Drain hose clamp (black color) Helpful Tip: Remove disposer knockout plug. 1. Fit rubber end (A) of drain hose to waste tee and cut if needed. A. Waste tee B. Drain trap B C. Drain hose D. Drain hose clamp (black color) 1. Fit rubber end (A) of drain hose to waste tee and cut if needed. A A. Two cut lines NOTE: Do not cut ribbed section. 2. Using a hammer and screwdriver, knock plug into disposer. A A. Two cut lines NOTE: Do not cut ribbed section. 2. Attach rubber end of drain hose to waste tee with a drain hose clamp (black color) (provided). Use pliers to squeeze clamp open and move into position. If the drain hose was cut, use a 11/2" to 2" (38 mm to 50 mm) screw-type clamp (not provided). 3. Use needle-nose pliers to remove plug. 4. Attach drain hose to disposer inlet with drain hose clamp (black color) (provided). Use pliers to squeeze clamp open and move into position. 26