Konica Minolta Kodak i2820 User Guide - Page 15
Connecting the power cord and USB cable, Plug the other end of the power cord into the wall outlet.
View all Konica Minolta Kodak i2820 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Connecting the power cord and USB cable When the drivers have been installed, connect the power supply, power cord and USB cable to the scanner. Refer to the illustration below for making proper connections. Make sure the power outlet is located within 1.52 metres (5 feet) of the scanner and is easily accessible. 1. Select the appropriate AC power cord from the supply of power cords packed with your scanner. 2. Attach the power cord to the power supply. NOTE: Be sure that the power cord is securely attached to the power supply. 3. Plug the output power cord from the power supply into the power port on the scanner. 4. Plug the other end of the power cord into the wall outlet. NOTE: The green LED on the power supply indicates the power is on. 5. Attach the USB cable to the scanner USB port, located on the back of the scanner. 6. Attach the other end of the USB cable to the proper USB port on your PC. A-61677 September 2016 9