Konica Minolta Kodak i2820 User Guide - Page 33
feed module housing., Reinstall the feed module.
![]() |
View all Konica Minolta Kodak i2820 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
4. Remove each tire by sliding the tire off the core assembly. 5. Install each new tire by gently pulling it over the core. IMPORTANT:Do not overstretch the tire; it may tear. 6. Replace the core assembly in the feed module. You may need to slide the shaft to the right or left so the core fits properly within the feed module housing. 7. Reinstall the feed module. 8. Reinstall the feed module cover by aligning the tabs in the slots and pushing the feed module cover down until it snaps into place. A-61677 September 2016 27
![](/manual_guide/products/konica-minolta-kodak-i2820-user-guide-22597e5/33.png)
A-61677
September 2016
27
4.
Remove each tire by sliding the tire off the core assembly.
5.
Install each new tire by gently pulling it over the core.
IMPORTANT:Do not overstretch the tire; it may tear.
6.
Replace the core assembly in the feed module. You may need to
slide the shaft to the right or left so the core fits properly within the
feed module housing.
7.
Reinstall the feed module.
8.
Reinstall the feed module cover by aligning the tabs in the slots and
pushing the feed module cover down until it snaps into place.