Konica Minolta Kodak i2820 User Guide - Page 25
Cleaning the separation module, replace the tires or the separation module. See Replacement
View all Konica Minolta Kodak i2820 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Cleaning the separation module The separation module should be removed from the scanner for best cleaning results. 1. Push the separation module up to snap out and lift it out of position. 2. Manually rotate and wipe the separation module tires with a roller cleaning pad. 3. Inspect the separation module. If the separation module tires show signs of wear or damage, replace the tires or the separation module. See "Replacement procedures" for more information. 4. Insert the separation module by aligning the tabs with the slots and snapping it into position. A-61677 September 2016 19
A-61677
September 2016
19
Cleaning the separation
module
The separation module should be removed from the scanner for best
cleaning results.
1.
Push the separation module up to snap out and lift it out of position.
2.
Manually rotate and wipe the separation module tires with a roller
cleaning pad.
3.
Inspect the separation module.
If the separation module tires show signs of wear or damage,
replace the tires or the separation module. See “Replacement
procedures” for more information.
4.
Insert the separation module by aligning the tabs with the slots and
snapping it into position.