Konica Minolta Kodak i2820 User Guide - Page 27
Vacuuming the scanner, snaps into place. Roll the feed module back into place.
View all Konica Minolta Kodak i2820 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
4. Inspect the feed module. If the feed module tires show signs of wear or damage, replace the tires or the feed module. See the "Replacement procedures" for more information. 5. Use a vacuum or cleaning pad to remove dust and debris from the feed module area. 6. Reinstall the feed module by aligning the pins and pushing it toward the left to fit it into position. Be sure the gears are aligned and it snaps into place. Roll the feed module back into place. Vacuuming the scanner 7. Reinstall the feed module cover by aligning the tabs with the slots and pushing it back into position until it snaps into place. Before cleaning the imaging area, it is suggested that you vacuum the inside of the scanner to remove any dust and debris. A-61677 September 2016 21