Konica Minolta bizhub 601 AU-211P CAC/PIV Solution User Guide - Page 15
Scan to SMB Related Settings - default password
View all Konica Minolta bizhub 601 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
How to Use the Authentication Unit 5 5.4.2 Scan to SMB Related Settings This section explains how to configure the Scan to SMB settings on the MFP. Client Settings Configure the setting to perform SMB TX. On the MFP control panel, press the [Utility/Counter] key, and then [Administrator Settings] - [Network Settings] - [SMB Settings] - [Client Settings]. Item Description ON/OFF Select [ON]. SMB Auth Setting Select [Kerberos] or [Kerberos/NTLMv2/v1] as the SMB TX authentication method. The default is [Kerberos]. In an NTLM authentication environment, select [Kerberos/NTLMv2/v1]. DFS Setting To perform SMB TX in a DFS (Distributed File System) environment, select "Enable". Password Authentication Restriction This system applies the user account of the CAC/PIV card to perform authentication even if the user ID or password is registered in the SMB TX address included in the address book. In this item, specify the action to be taken when authentication has failed using the user account of the CAC/PIV card. If "Limit" is selected, it results in an authentication failure. If "Do Not Limit" is selected, enter the user ID and password on the control panel when sending data. 2 Note Specify the WINS server or direct hosting service to fit your environment. For details, refer to the User's Guide [Network Administrator] supplied together with the MFP. AU-211P 77