Kyocera ECOSYS P7240cdn P6235cdn/P7240cdn Operation Guide - Page 156
Description, Network Authentication, IMPORTANT, After changing the setting
![]() |
View all Kyocera ECOSYS P7240cdn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 156 highlights
Setup and Registration (System Menu) > System Menu Item Custom Setup Network Name (SSID) Netwk Authentic. Encryption TCP/IP Settings TCP/IP IPv4 Setting DHCP Auto-IP IP Address Subnet Mask Default Gateway Description The detailed settings for wireless LAN can be changed. Set the SSID (Service Set Identifier) of the wireless LAN to which the machine connects. NOTE Up to 32 characters can be entered. Select network authentication type. Value: Open, WPA2/WPA-PSK, WPA2-PSK, WPA2/WPA-EAP, WPA2-EAP Select encryption method. The setting values vary depending on the Network Authentication setting. Network Authentication Encryption Open Disable ― WEP WEP Key: Up to 26 characters WEP Key Index: 0 to 3 WPA2/WPA-PSK Data Encryption: AES, Auto Preshared Key: Up to 64 characters WPA2-PSK Data Encryption: AES Preshared Key: Up to 64 characters WPA2/WPA-EAP Data Encryption: AES, Auto WPA2-EAP Data Encryption: AES - Select whether to use TCP/IP Protocol. Value: Off, On Set up TCP/IP (IPv4) to connect to the network. This setting is available when [TCP/IP] is set to [On]. Select whether to use the DHCP (IPv4) server. Value: Off, On Select whether to use Auto-IP. Value: Off, On Set the IP address. Value NOTE When DHCP is set to [On], this item is displayed only and cannot be entered. Set the IP subnet mask. Value NOTE When DHCP is set to [On], this item is displayed only and cannot be entered. Set the IP gateway address. Value NOTE When DHCP is set to [On], this item is displayed only and cannot be entered. IMPORTANT After changing the setting, restart the network or turn the machine OFF and then ON. 8-14
![](/manual_guide/products/kyocera-ecosys-p6235cdn-p6235cdnp7240cdn-operation-guide-e4e5e96/156.png)