Kyocera ECOSYS P7240cdn P6235cdn/P7240cdn Operation Guide - Page 163
Network, Primary Network, IMPORTANT, After changing the setting
View all Kyocera ECOSYS P7240cdn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 163 highlights
Setup and Registration (System Menu) > System Menu Item Description REST over SSL Off/On - Select whether to use REST secured by SSL.*1, *3 Value: Off, On Port Number NOTE • This function is displayed when [Off/On] is set to [On]. • When selecting [On], it also requires a certificate for SSL. the default certificate is the self- certificate of the machine. Command Center RX User Guide Specifies the port number used. The default port number is 9081.*1 Value: 1 to 32767 NOTE This function is displayed when [Off/On] is set to [On]. Available Net. Wi-Fi Direct*2 Wi-Fi*2 Wired Network Set whether to enable this function for each network. Value: Disable, Enable NOTE This function is displayed when [Off/On] is set to [On]. *1 The setting will be changed after restarting the device or network. *2 This function is displayed when the optional Wireless Network Interface Kit is installed. *3 Set "SSL" to [On] in SSL Setting. SSL Setting (page 8-31) IMPORTANT After changing the setting, restart the network or turn the machine OFF and then ON. Primary Network [Menu] key key > [Network] > [OK] key key > [Primary Network] > [OK] key NOTE This function is displayed when the optional Network Interface Kit (IB-50) or Wireless Network Interface Kit (IB-51 or IB-36) is installed. Item Primary Network Description Specify the network to be used for the send function, the network authentication and connecting to external address book. Value: Wi-Fi, Wired Network, Optional Network Ping [Menu] key key > [Network] > [OK] key key > [Ping] > [OK] key Ping Item Description Checks if communication with the destination by entering the host name or IP address of the destination is possible. 8-21