Kyocera ECOSYS P7240cdn P6235cdn/P7240cdn Operation Guide - Page 57
Energy Saver function, Sleep and Auto Sleep
View all Kyocera ECOSYS P7240cdn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Installing and Setting up the Machine > Energy Saver function Energy Saver function If a certain period of time elapses after the machine is last used, the machine automatically enters sleep mode, which minimizes power consumption. Sleep and Auto Sleep NOTE If user login administration is enabled, you can only change the settings by logging in with administrator privileges. If user login administration is disabled, the user authentication screen appears. Enter a login user name and password, and select [Login]. The factory default login user name and login password are set as shown below. ECOSYS P6235cdn ECOSYS P7240cdn Login User Name: 3500 4000 Login Password: 3500 4000 Auto Sleep Auto Sleep automatically switches the machine into Sleep if left idle for a preset time. The default preset time is 1 minute. To resume, perform the following actions. • Select the [OK] key. The machine will be ready to operate within 19 seconds for ECOSYS P6235cdn and 21 seconds for ECOSYS P7240cdn. Note that ambient environmental conditions, such as ventilation, may cause the machine to respond more slowly. Follow the steps below to set the sleep timer for the machine to go into sleep mode when not in use. 1 Display the screen. [Menu] key key > [Device Common] > [OK] key key > [Timer Setting] > [OK] key key > [Sleep Timer] > [OK] key 2 Set the Sleep time. 1 Enter the Sleep time. NOTE Use the numeric keys or select the [▲] or [▼] key to enter a number. 2 Select the [OK] key. Status (Sleep Level Set.) You can set whether sleep mode operates for each function. When the machine enters sleep mode, the ID card cannot be recognized. For more information on Status, refer to the following: Status (page 8-28) 2-24