Kyocera ECOSYS P7240cdn P6235cdn/P7240cdn Operation Guide - Page 215

Troubleshooting > Troubleshooting Symptom Part of the image is ― periodically faint or shows white lines. ― Checkpoints Skewed-color printout. ― ― Corrective Actions Open and then close the rear cover. ECOSYS P6235cdn: Select the [Menu] key > [Adjust/Maint.] > [Service Setting] > [MC] and decrease the adjustment value. Decrease the adjustment value 1 level at a time from the current value. If there is no improvement after the value is decreased by 1 level, decrease by 1 level again. If there is still no improvement, return the setting to the original value. Run [ColorCalibration]. Run [Color Regist.]. Reference Page page 2-2 ― page 10-20 page 10-20 Colors appear different than you anticipated. When printing from a computer ― Adjust the color using the printer driver. The previous image remains ― and lightly printed. ECOSYS P6235cdn: Select the [Menu] ― key > [Adjust/Maint.] > [Service Setting] > [MC] and increase the adjustment value. Increase the adjustment value 1 level at a time from the current value. If there is no improvement after the value is increased by 1 level, increase by 1 level again. If there is still no improvement, return the setting to the original value. The color toner is empty. Do you want to continue printing in black and white? If the black toner is remained, the machine continues printing in black and white by selecting [Print in B & W] of [ColorToner Empty]. page 8-27 The machine is emitting steam in the area around the paper ejection slot. Check the room temperature to see if it is low, or if damp paper was used. Depending on the printing environment ― and the paper's condition, the heat generated during printing will cause the moisture in the paper to evaporate, and the steam emitted may look like smoke. This is not a problem, and you can continue printing. If the steam concerns you, raise the room temperature, or replace the paper with a newer, dryer paper. 10-12