Kyocera ECOSYS P7240cdn P6235cdn/P7240cdn Operation Guide - Page 75
Changing Device Information, Device Settings, System
View all Kyocera ECOSYS P7240cdn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Installing and Setting up the Machine > Command Center RX Changing Device Information 1 Display the screen. 1 Launch your Web browser. 2 In the address or location bar, enter the machine's IP address or the host name. Print the status page to check the machine's IP address and the host name. [Menu] key key > [Report] > [OK] key key > [Report Print] > [OK] key key > [Status Page] > [OK] key > [Yes] 3 Log in with administrator privileges. The factory default setting for the default user with administrator privileges is shown below. (Upper case and lower case letters are distinguished (case sensitive).) Login User Name: Admin Login Password: Admin 4 From the [Device Settings] menu, click [System]. 3 1 2 2-42
2-42
Installing and Setting up the Machine > Command Center RX
Changing Device Information
1
Display the screen.
1
Launch your Web browser.
2
In the address or location bar, enter the machine's IP address or the host name.
Print the status page to check the machine's IP address and the host name.
[
Menu
] key > [
▲
] [
▼
] key > [
Report
] > [
OK
] key > [
▲
] [
▼
] key > [
Report Print
] > [
OK
] key >
[
▲
] [
▼
] key > [
Status Page
] > [
OK
] key > [
Yes
]
3
Log in with administrator privileges.
The factory default setting for the default user with administrator privileges is shown below. (Upper
case and lower case letters are distinguished (case sensitive).)
Login User Name:
Admin
Login Password:
Admin
4
From the [
Device Settings
] menu, click [
System
].
2
3
1