Kyocera ECOSYS P7240cdn P6235cdn/P7240cdn Operation Guide - Page 63
Installing and Setting up the Machine > Installing Software, If Wi-Fi or Wi-Fi Direct is enabled
![]() |
View all Kyocera ECOSYS P7240cdn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Installing and Setting up the Machine > Installing Software 4 Install the software. 1 Select the device to be installed. 1 2 IMPORTANT If Wi-Fi or Wi-Fi Direct is enabled, be sure to specify the IP address for the port name. Installation may fail if the host name is specified. NOTE • The machine cannot be detected unless it is on. If the computer fails to detect the machine, verify that it is connected to the computer via a network or USB cable and that it is turned on and click (Reload). • If the desired device does not appear, select [Add custom device] to directly select the device. 2 Select the driver to be installed. 1 2 3 2-30
![](/manual_guide/products/kyocera-ecosys-p6235cdn-p6235cdnp7240cdn-operation-guide-e4e5e96/63.png)
2-30
Installing and Setting up the Machine > Installing Software
4
Install the software.
1
Select the device to be installed.
2
Select the driver to be installed.
IMPORTANT
If Wi-Fi or Wi-Fi Direct is enabled, be sure to specify the IP address for the port
name. Installation may fail if the host name is specified.
NOTE
•
The machine cannot be detected unless it is on. If the computer fails to detect the
machine, verify that it is connected to the computer via a network or USB cable and
that it is turned on and click
(Reload).
•
If the desired device does not appear, select [
Add custom device
] to directly select
the device.
1
2
2
3
1