Kyocera ECOSYS P7240cdn P6235cdn/P7240cdn Operation Guide - Page 157
Wired Netwk. Set, Network, IMPORTANT, After changing the setting
View all Kyocera ECOSYS P7240cdn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 157 highlights
Setup and Registration (System Menu) > System Menu Item IPv6 Setting IPv6 Setting Manual Settings RA(Stateless) DHCPv6 Settings Restart Network Description Set up TCP/IP (IPv6) to connect to the network. This setting is available when [TCP/IP] is [On]. Select whether to use IPv6. Value: Off, On NOTE Selecting [On] displays IP address in [Link Local] after restarting the network. Manually specify the IP address, prefix length, and gateway address of TCP/IP (IPv6). Value IP Address: 128-bits address is expressed in eight groups consisting of four-digit hexadecimal digits. The groups are separated by colon (:). Prefix Length: 0 to 128 Default Gateway: 128-bits address is expressed in eight groups consisting of four-digit hexadecimal digits. The groups are separated by colon (:). NOTE This function is displayed when [IPv6 Setting] is set to [On]. To enter "Default Gateway", set [RA (Stateless)] to [Off]. Select whether to use RA (Stateless). Value: Off, On NOTE This function is displayed when [IPv6 Setting] is set to [On]. Selecting [On] displays IP address in [IP Address 1 (to 5)] after restarting the network. Select whether to use the DHCP (IPv6) server. Value: Off, On NOTE This function is displayed when [IPv6 Setting] is set to [On]. Selecting [On] displays IP address in [IP Address] after restarting the network. Restarts the network. IMPORTANT After changing the setting, restart the network or turn the machine OFF and then ON. Wired Netwk. Set [Menu] key key > [Network] > [OK] key key > [Wired Netwk. Set] > [OK] key Configure wired network settings. Item TCP/IP Settings LAN Interface Description For details on setting value. TCP/IP Settings (page 8-14) Specify the settings for the LAN interface to be used. Value: Auto, 10BASE-Half, 10BASE-Full, 100BASE-Half, 100BASE-Full, 1000BASE-T IMPORTANT After changing the setting, restart the network or turn the machine OFF and then ON. 8-15