Kyocera KM-3530 Fax System C Operation Guide - Page 132
Transmission was attempted, but was unsuccessful because the destination party's memory has become
View all Kyocera KM-3530 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 132 highlights
Section 8 Reference Information CODE U09000 U12000 U14000 U14100 CAUSE AND/OR PROCEDURE FOR CORRECTION Communication was attempted but, but was unsuccessful because the other party's fax does not match the communication protocol in use (the other party is using a G2 facsimile). An F-Code Based Relay Broadcast Transmission command was received, but all the data to be transmitted was not received because the memory in your fax machine has become full. Check the contents of your machine's memory and, after you have created sufficient space in memory, have the initial transmitting station perform the transmission operation again. A reception from an F-Code box was attempted, but was unsuccessful because the memory in your fax machine has become full. Print out data from memory and try again or abandon the F-Code Based Confidential Reception attempt. The destination fax is one of our models and a transmission to a destination party's F-Code Box was attempted, but was unsuccessful because memory in the destination party's fax machine has become full. U19000 U19100 U19200 U19300 U19400 Memory Reception was attempted, but was unsuccessful because your memory has become full. Clear your memory of all other data and attempt reception again. Transmission was attempted, but was unsuccessful because the destination party's memory has become full. Check with the destination party. The data stored in memory is faulty. Perform the necessary communication procedures again. A transmission was attempted, but was unsuccessful because the data to be transmitted is faulty. Perform the transmission procedure again. A reception was attempted, but was unsuccessful because the received data is faulty. Perform the reception procedure again. 8-10