Kyocera KM-3530 Fax System C Operation Guide - Page 35
key. The Key Code/Box Number Input screen will appear.
View all Kyocera KM-3530 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
13 Use the keypad to enter the desired subaddress and F-Code password. (Maximum 20 digits) * To switch between the subaddress and password input screens, touch the "Password" key. * A subaddress is required during F-Code Based Communication in order to designate the other party's corresponding F-Code Box. * An F-Code password is used during F-Code Based Communication. However, you do not have to enter an F-Code password here if you have determined in advance with the other party not to use one. Section 1 Fax Operation (Basic Use) 18 Touch the "Encryption box #" key and then use the keypad to enter the number of the destination party's Encryption Box. 19 Touch the "Close" key twice. 14 Touch the "Close" key twice and then go directly to step 20. 20 To register this one-touch key with the entered information as is, touch the "OK" key. The message display will return to the same screen as was displayed in step 3. If you want to continue registering other one-touch keys, repeat steps 3 through 20. 15 If you want to designate this key for Encrypted Transmission, touch the "Encryption TX" ["Encryption"] key. 21 If you are finished registering one-touch keys, press the Reset key. 16 To use this key for Encrypted Transmission, touch the "On" key. The Key Code/Box Number Input screen will appear. 17 Use the keypad to enter the 2-digit Key Code (01 - 20) that corresponds to the Encryption Key you want to use for this one-touch key. (Inch) (Metric) 1-27