LG BD670 Owner's Manual - Page 29

System Setting 29 Sampling Freq. DTS Neo:6 (Digital Audio Output) If the player is connected to the multi-channel [192 kHz] Audio Receiver by HDMI connection, set this option to enjoy the multi-channel surround sound with Select this if your A/V Receiver or Amplifier is the 2-channel audio source. capable of handling 192 kHz signals. [96 kHz] Select this if your A/V Receiver or Amplifier is not capable of handling 192 kHz signals. When [Off ] Outputs the stereo sound via front speakers. [Music] this choice is made, this unit Outputs the multi-channel sounds that are automatically converts any 192 kHz signals to optimized for listening to music. 96 kHz so your system can decode them. [Cinema] [48 kHz] Outputs the multi-channel sounds that are Select this if your A/V Receiver or Amplifier is optimized for watching movie. 3 not capable of handling 192 kHz and 96 kHz signal. When this choice is made, this unit ,,Note System Setting automatically converts any 192 kHz and 96 kHz yy This function is not available on an on-line signals to 48 kHz so your system can decode service. them. yy Only the audio source with less than 48 Check the documentation for your A/V Receiver or Amplifier to verify its capabilities. kHz sampling frequency is available for this function. yy This function is availabe only when [HDMI] DRC (Dynamic Range Control) option is set to [PCM Multi-Ch]. This function allows you to listen to a movie at a lower volume without losing clarity of sound. [Off ] Turns off this function. [On] Compress the dynamic range of the Dolby Digital, Dolby Digital Plus or Dolby TrueHD audio output. [Auto] The dynamic range of the Dolby TrueHD audio output is specified by itself. And the dynamic range of the Dolby Digital and Dolby Digital Plus are operated as same as the [On] mode. ,,Note The DRC setting can be changed only when a disc is not inserted or the unit is in complete stop mode.