LG LSC27914ST Owner's Manual - Page 27
Failure Diagnosis Function
View all LG LSC27914ST manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
1-16. Failure Diagnosis Function To display the error message, press and hold ICE PLUS button and FREEZER button. If no errors are displayed, all LEDs will be illuminated. If a primary or secondary error is present, certain LEDs will be illuminated indicating failure mode. No. ITEM 1 No Error 2 Abnormal Freezer Sensor FAILURE CODE INDICATOR (F-Section) ALL LED ON CONTENTS OF FAILURE - 3 Abnormal Refrigerator Sensor (1) 4 Abnormal Refrigerator Sensor (2) 5 Abnormal Defrost Sensor 6 Abnormal Room Temperature Sensor 7 Abnormal Icemaker Sensor 8 Abnormal Defrost 9 Icemaker UNIT SEE NOTE (1) Cut o short circuit wire SEE NOTE (1) SEE NOTE (1) SEE NOTE (1) Defrost heater defective, fuse melting, short circuit, unplugged connector (error indicated 80 min later after trouble). Faulty Icemkaer unit, Motor or Hall IC; Lead wire short circuit; Faultumotor driver. PRODUCT OPERATION STATUS IN FAILURE Compressor Freezer Fan Cooling Fan Defrost Heater STEP MOTOR 15min ON / 15min OFF Standard RPM Standard RPM 10 min OPEN / 15min CLOSE Standard RPM No Defrost Standard RPM 10 Abnormal Freezing BLDC Fan Motor 11 Abnormal Cooling BLDC Fan Motor Motor defect, hooked of lead wire to fan, contact of structures with fan, short or open of lead wire (there is no signal of BLDC Motor for more than 115s in operation of fan motor). Off (Re-check after 30min) Off (Re-check after 30min) Primary Error: F sensor, R1 sensor, D sensor, Defrost errors, F-FAN errors, C-FAN Error. Secondary Error: R2 sensors, RT sensors, W / T sensors, I / M sensors, I / M Kit. When an error occur the first 3 hours the Primary Error and Secondary Error is indicated in the display check mode (Pressing FREEZER and ICE PLUS button at the same time more than one second). After the 3 hours and if the error is still present the Primary Error will show in the display automatically (See Note 1) and the Secondary Error is indicated in the display check mode. Note1: In the Primary Error after 3 hours of the error occurs all display lights turn OFF except the Freezer Temperature (Trouble Code Index) indicating the failure mode. - 26 -