LG LSC27914ST Owner's Manual - Page 7
How To Install The Refrigerator - door removal
View all LG LSC27914ST manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
3. HOW TO INSTALL THE REFRIGERATOR 1. DOOR ALIGNMENT Before adjusting the doors, remove the Base Grille. If the freezer compartment door is lower than the refrigerator compartment door, make them level by inserting flat blade screwdriver into the groove of the left leveling leg and rotating it clockwise. Adjust the level when the refrigerator door is lower than the freezer door during the installation of the refrigerator. Tools you need • Wrench 5/16 in (8 mm) • Wrench 3/4 in (19 mm) Left leveling leg Height difference Height difference Height difference Keeper nut Wrench Height Adjustment Up difference hinge pin Down If the freezer compartment door is higher than the refrigerator compartment door, make them level by inserting flat blade screwdriver into the groove of the right leveling leg and rotating it clockwise. Height difference Height difference Right leveling leg Using a ¾" (19 mm) wrench, turn the keeper nut clockwise to lossen the keeper nut. Using a 5/16" (8 mm) wrench, turn the adjustment hinge pin clockwise or counter clockwise to level the refrigerator and freezer door. After setting the level door, turn the keeper nut counter clockwise to tighten. Do not over tight the door adjustment screw. The hinge pin can be pulled out. (Adjustable range of height is a maximum of ½" (1.27 cm)). AFTER LEVELING THE DOOR HEIGHT Make sure the front leveling legs are completely touching the floor. - 6 -