LG LSC27914ST Owner's Manual - Page 8

Install Water Filter

Page 8 highlights

2. INSTALL WATER FILTER • Filter Reset: When the Filter icon turns on, you have to change the water filter. Press the Filter button for 3 seconds to turn the icon . Before removing or installing water filter: 1. Take out the top shelf and move it to the lowest level. 2. IMPORTANT: Turn off household water supply. Installing the water filter Remove red cap from the filter and insert the two tabs on the filter tip into the two slots in the refrigerator filter receptacle. You should feel the filter entering completely. Turn the filter to the right a quarter turn clockwise to lock it into place. The locked symbol will be lined up with the indicator arrow. Removing the water filter: 1. For first-time installation, remove filter substitute cap (A) by turning it counterclockwise a quarter turn and pulling it down. The substitute cap must be retained for the future. If the filter is removed and not replaced, it is necessary to reinstall the substitute cap to prevent water leaks from the filter housing. 2. For subsequent installation, remove old filter by slowly turning it to the left a quarter turn and pulling it down. After installing water filter 1. Replace the shelf to the initial position. 2. Turn on household water supply. 3. Dispense 2.5 gallons (9.46 L) of water to purge the system, depressing and releasing the dispenser button (30 seconds ON, 60 seconds OFF). Open the refrigerator door and check the shelf area for leaks. A Filter - 7 -

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140

2. INSTALL WATER FILTER
Removing the water filter:
1. For first-time installation, remove filter substitute cap
(A) by turning it counterclockwise a quarter turn and
pulling it down.
The substitute cap must be retained
for the future. If the filter is removed and not
replaced, it is necessary to reinstall the substitute
cap to prevent water leaks from the filter housing.
Installing the water filter
Remove red cap from the filter and insert the two
tabs on the filter tip into the two slots in the
refrigerator filter receptacle. You should feel the filter
entering completely. Turn the filter to the right a quarter
turn clockwise to lock it into place. The locked symbol
will be lined up with the indicator arrow.
A
After installing water filter
1. Replace the shelf to the initial position.
2. Turn on household water supply.
3. Dispense 2.5 gallons (9.46 L)
of water to purge the
system, depressing and releasing the dispenser button
(30 seconds ON, 60 seconds OFF). Open the
refrigerator door and check the shelf area for leaks.
- 7 -
Before removing or installing water filter:
1.
Take out the top shelf and move it to the lowest level.
2. IMPORTANT:
Turn off household water supply.
Filter Reset: When the Filter icon turns on, you
have to change the water filter. Press the Filter
button for 3 seconds to turn the icon
.
2. For subsequent installation, remove old filter by
slowly turning it to the left a quarter turn and pulling it
down.
Filter