LG P930 User Guide - Page 39

Charging your phone 1 Connect the cabless wall adapter and USB cable as shown below. The LG logo on the USB cable should face toward you. 2 Plug the USB cable (as shown below) into the phone's charger/accessory port. Make sure the 'B' side is facing upwards. NOTE Your phone has an internal antenna. Be careful not to scratch or damage this rear area, as that will cause loss of performance. If the phone is turned off as the battery is fully discharged, the battery is called a weak battery. In this case when the phone connect to the charger(TA or USB) cable, the keypad LED at the bottom of the phone will be blinking. This is normal operation in the weak battery to prevent over-current flowing because the phone is designed to provide reasonable protection algorithm for against damage of battery. And after a few minutes, the LCD is turned on normally. NOTE The battery must be fully charged initially to improve battery lifetime. Inserting a micro SD card Insert a micro SD™ card to use the camera and other multimedia features. Multimedia contents can be saved in the micro SD card. LG-P930 has a micro SD card pre-installed. 37