Lenovo NetVista IBM PC300 (Type 2169) - Hardware Maintenance Manual (September - Page 130
Replacing the system battery, you need to reset the system date and time.
View all Lenovo NetVista manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 130 highlights
Replacing the system battery Follow these steps to replace the battery: 1. Place the blade of a small, flat-blade screwdriver under the edge of the retaining clip. 2. Turn the screwdriver one quarter turn, raising the clip while pressing down on the old battery to remove it. 3. Carefully raise the retaining clip, and insert the new battery with the + symbol facing out. 4. Insert a new 3V lithium battery IBM part number 33F8354 (battery type CR2032) into the socket and press it down until the securing clip clicks and locks the battery in if you replace the system battery, you need to reset the system date and time. Note: Before replacing the lithium battery review the lithium battery notice at the front of this publication. Important: Make sure you insert the battery with the positive side on top. A plus (+) sign indicates the positive side. 128