Lenovo NetVista IBM PC300 (Type 2169) - Hardware Maintenance Manual (September - Page 98
Keyboard, Do You Receive Post Memory Error
View all Lenovo NetVista manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
q Power on the system unit. q Take note of any messages, error codes, or symptoms. 002 - DO YOU RECEIVE POST MEMORY ERROR MESSAGE? (YES, READ AHEAD. NO, GO TO STEP 003) q Enter BIOS Setup Utility then reboot the system. Take note of any messages, error codes, or symptoms. If the error message remains, go to step 005. 003 q Follow the screen instructions to run the Memory test. 004 - DOES THE MEMORY TEST COMPLETE WITHOUT AN ERROR? (YES, READ AHEAD. NO, GO TO STEP 005.) q The system memory is now functioning correctly. If you suspect an intermittent problem, run the Memory test again. q End. 005 q Replace each DIMM, one at a time, with a known working DIMM of the same size and type. q If the problem does not appear, it means that the last DIMM replaced is defective. If all DIMMs on the system board have been replaced and the problem remains, replace system board. q Go to step 001. NOTE: If on startup, there is no memory inserted on system board, you will hear 2-(repeatedly). (2:long beep) Keyboard 001 - START q Power off the system unit and make sure that the keyboard plug is connected properly. 002 q Insert the diagnostics diskette into the diskette drive and power on the system unit. q Select Interactive Tests menu, then execute Keyboard test. 96