Lenovo NetVista IBM PC300 (Type 2169) - Hardware Maintenance Manual (September - Page 86
Execute Load BIOS Default Settings in BIOS Setup, Error Symptoms, Action/FRU, Parallel
View all Lenovo NetVista manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
Table 2-3 Error Symptoms List Error Symptoms Action/FRU NOTE: To diagnose a problem, first find the error symptom in the left column. If directed to a check procedure, replace the FRU indicated in the check procedure. If no check procedure is indicated, the first Action/FRU listed in right column is the most likely cause. Display problem: - Incorrect colors - No high intensity - Missing, broken, or incorrect characters - Blank monitor(dark) - Blank monitor(bright) - Distorted image - Unreadable monitor - Other monitor problems Monitor signal connection/cable. Monitor System board Display changing colors. Monitor signal connection/cable Monitor System board Display problem not listed above (including blank or illegible monitor). "Monitor" on page 102. Load default settings (if screen is readable). System board Parallel NOTE: Execute "Load BIOS Default Settings" in BIOS Setup to confirm ports' presence before diagnosing any parallel/serial ports problems. Serial or parallel port Make sure that the LPT# or COM# you loop-back test test is the same as is set in BIOS failed. Setup. Loop-back. System board. 84