Lenovo PC 300PL Using your Personal Computer - PC300PL - 6592 - Page 93
Installing Options, in Your Personal Computer, Installing Options in, Your Personal Computer
View all Lenovo PC 300PL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
POST Message 1801 Description A PCI adapter has requested memory resources that are not available. Action: 1. Make sure that settings for all ISA legacy adapters are correct in the Configuration/Setup Utility program. If the memory resource settings are not correct, change and save the settings. Setting the resources used by ISA legacy adapters to Not available enables the Plug and Play function to configure around the legacy adapters. For background information on PCI, ISA, Plug and Play, and legacy (non-Plug and Play) adapters, refer to Installing Options in Your Personal Computer. For information about required memory resource settings for ISA legacy adapters, refer to the documentation that comes with these adapters. For instructions on using the Configuration/Setup Utility program, see "Using the Configuration/Setup Utility Program" on page 37. 2. Make sure that switches on all ISA legacy adapters are set correctly. For information about switch settings, refer to the documentation that comes with the ISA legacy adapters. 3. If all memory resources are being used by ISA legacy adapters, you might need to remove an ISA legacy adapter to make memory available to the PCI adapter you want to install. For instructions on removing adapters, see Installing Options in Your Personal Computer. Note: If you remove an ISA legacy adapter, set the memory resources used by the removed adapter to Available before installing another adapter. 4. If you have other PCI or Plug and Play adapters installed, you might need to remove one of these adapters to make memory available to the PCI adapter you want to install. If the problem cannot be isolated and corrected, have the computer serviced. Chapter 6. Solving Problems 79