Lenovo PC 300PL Using your Personal Computer - PC300PL - 6562 - Page 101
Monitor Problems, Action
View all Lenovo PC 300PL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
Monitor Problems Wavy, unreadable, rolling, distorted, or jittery screen images. Action If the monitor self-tests show that the monitor is working properly, verify that: 1. The location of the monitor is appropriate. Magnetic fields around other devices, such as transformers, appliances, fluorescent lights, and other monitors might be causing the problem. To determine if this is the difficulty: a. Turn off the monitor. (Moving a color monitor while it is turned on might cause screen discoloration.) b. Adjust the placement of the monitor and other devices so that they are at least 305 mm (12 in.) apart. Also, when relocating the monitor, be sure it is at least 75 mm (3 in.) from the diskette drives to prevent diskette drive read/write errors. c. Turn on the monitor. 2. An IBM monitor signal cable is properly connected to the monitor and computer, and that the cable is installed securely. Non-IBM monitor signal cables might cause unpredictable problems. 3. You are not trying to run your monitor at a higher refresh rate than the monitor supports. Refer to the documentation that comes with your monitor for supported refresh rates. Note: An enhanced monitor signal cable with additional shielding might be available for your monitor. See your IBM reseller or IBM marketing representative for information. If the problem cannot be isolated and corrected, have the monitor and computer serviced. Chapter 6. Solving Problems 87