Lenovo PC 300PL Using your Personal Computer - PC300PL - 6562 - Page 51
Exiting from the Configuration/Setup Utility Program
View all Lenovo PC 300PL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
In the Configuration/Setup Utility program menus, the configuration information you can change is enclosed in brackets like these [ ]. You cannot change information that is not surrounded by brackets. Exiting from the Configuration/Setup Utility Program When you finish viewing or changing settings in the Configuration/Setup Utility program, follow these steps to save any changes you have made and to exit from the program: 1. Press Esc until you return to the Configuration/Setup Utility program menu. (Depending on where you are in the program, you might have to press Esc several times to get back to the Configuration/Setup Utility program menu.) 2. Do one of the following: a. To restore the settings that were in effect before you made changes and saved your changes, select Restore Settings. b. To load the default values for all settings, select Load Default Settings. c. To save any changed settings (including restored settings or default settings), select Save Settings. If you do not save settings here, you are given the opportunity to do so in the Exit Setup menu. 3. From the Configuration/Setup Utility program menu, press Esc, and follow the instructions on the screen. Chapter 4. Configuring Your Computer. 37