Lenovo PC 300PL Using your Personal Computer - PC300PL - 6562 - Page 40
System Programs
View all Lenovo PC 300PL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
can remotely monitor and control your PC. DMI can be used to remotely track many types of information about networked PCs, including serial numbers, memory attributes, product-specific characteristics of installed peripherals, and operating system configuration information. This information can be accessed using a DMI browser. DMI browsers are provided by all major operating systems and all major LAN management packages (including TME 10 NetFinity, Intel LAN Desk, and Microsoft SMS). Your computer also has system-management hardware and software that provides power, temperature, fan speed, and chassis intrusion information that is accessible from a DMI browser. The Wake on LAN feature can be used by a network administrator to turn on your PC from a management console. When Wake on LAN is used in conjunction with network-management software, such as TME 10 NetFinity Version 4 (provided on the Ready-to-Configure CD that comes with your computer), many types of functions, such as data transfers, software updates, and POST and BIOS updates can be performed remotely on your PC and other computers enabled for Wake on LAN that are linked to your network. This updating can be done after hours and on weekends, which saves time and increases productivity. Users are not interrupted during normal working hours and LAN traffic is kept to a minimum. Refer to "Wake on LAN" on page 54 for further information. Other features such as remote program load (RPL) and dynamic host configuration protocol (DHCP) also allow a network administrator to remotely control your computer. If you use remote program load in conjunction with LANClient Control Manager software, you can use a feature called Hybrid RPL. Using LANClient Control Manager, you set up your computer by installing hybrid images (or files) on the hard disk drive. Then, each time the computer starts from the network, LANClient Control Manager recognizes your computer as a Hybrid RPL client and a bootstrap program is downloaded to your computer. This bootstrap program is small and helps prevent network congestion. Working off the hybrid images, the bootstrap program initiates the startup process from the hard disk drive of your computer. An advantage to Hybrid RPL is that the network load associated with standard RPL is avoided. Refer to "RPL and DHCP" on page 53 for further information. System Programs System programs are the basic layer of software built into every IBM PC. They include the power-on self test (POST), the basic input/output system (BIOS) code, and the Configuration/Setup Utility program. POST is a set of tests and procedures that is performed every time you turn on your PC. The BIOS is a layer of software 26 Using Your Personal Computer