Lenovo RS110 User Guide - Page 43
Installing, drive
UPC - 884343312484
View all Lenovo RS110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
d. Push the tray handle to the closed (locked) position. e. Check the hard disk drive status LED to make sure that the hard disk drive is operating correctly. If the amber hard disk drive status LED for a drive is lit continuously, that drive is faulty and must be replaced. If the green hard disk drive activity LED is flashing, the drive is being accessed. If you have other devices to install, do so now. Otherwise, go to "Completing the installation" on page 35. Installing a new CD or DVD drive The server comes with a CD or CD/DVD drive installed. You can remove the drive and install a different one. See http://www.lenovo.com/thinkserver for a list of CD or CD/DVD drives you can use with the server. To remove a CD or CD/DVD drive, complete the following steps. 1. Read the safety information that begins on page v and "Installation guidelines" on page 19. 2. Turn off the server and peripheral devices, and disconnect the power cords and all external cables. Remove the cover (see "Removing the cover" on page 21). 3. Pull the release tab 1 (the rear of the drive-retention clip) toward the right side of the server to release the clip; then, while you pull the tab, pull the drive out of the bay. Note: You might have to push the right-rear corner of the drive toward the front of the server to move the drive initially. Chapter 2. Installing optional devices 29