Lenovo ThinkCentre M58 Hardware Maintenance Manual - Page 65
Mouse Port interface Test Passed, Mouse Port interface Device controller
View all Lenovo ThinkCentre M58 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Diagnostic Error Code 080-197-XXX Game Port interface test warning 080-198-XXX Game Port interface test aborted 080-199-XXX Game Port interface test failed, cause unknown 086-000-XXX Mouse Port interface Test Passed 086-001-XXX Mouse Port interface Presence 086-032-XXX Mouse Port interface Device controller failure 086-035-XXX Mouse Port interface Reset 086-040-XXX Mouse Port interface IRQ failure 086-195-XXX Mouse Port interface Test aborted by user 086-196-XXX Mouse Port interface test halt, error threshold exceeded 086-197-XXX Mouse Port interface test warning 086-198-XXX Mouse Port interface test aborted FRU/Action 1. Make sure the component that is called out is connected and/or enabled. See Chapter 6 "Using the Setup Utility program" on page 43 2. Re-run test 3. Replace the component that is called out in warning statement 4. Replace the component under test 1. If a component is called out, make sure it is connected and/or enabled. See Chapter 6 "Using the Setup Utility program" on page 43 2. Flash the system and re-test. See "Updating (flashing) BIOS from a disc" on page 276 3. Go to "Undetermined problems" on page 66 1. See "Undetermined problems" on page 66 2. Flash the system and re-test. See "Updating (flashing) BIOS from a disc" on page 276 3. Replace component under function test No action 1. Mouse 2. System board 1. Mouse 2. System board 1. Mouse 2. System board 1. Run Setup 2. Mouse 3. System board Information only Re-start the test, if necessary 1. Press F3 to review the log file 2. Re-start the test to reset the log file 1. Make sure the component that is called out is connected and/or enabled. See Chapter 6 "Using the Setup Utility program" on page 43 2. Re-run test 3. Replace the component that is called out in warning statement 4. Replace the component under test 1. If a component is called out, make sure it is connected and/or enabled. See Chapter 6 "Using the Setup Utility program" on page 43 2. Flash the system and re-test. See "Updating (flashing) BIOS from a disc" on page 276 3. Go to "Undetermined problems" on page 66 Chapter 7. Symptom-to-FRU index 59