Lenovo ThinkCentre M58 Hardware Maintenance Manual - Page 71
Setup/Configuration see Starting the Setup Utility, AC/DC Power Adapter
View all Lenovo ThinkCentre M58 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Message/Symptom FRU/Action Computer will not PXE from server 1. Ensure that network is in startup sequence as first device or first device after diskette 2. Ensure that network adapter is enabled for PXE 3. Network adapter (Advise network administrator of new MAC address) Computer will not perform a Wake on LAN® (if applicable) 1. Check power supply and signal cable connections to network adapter 2. Ensure that the operating system settings are set to enable Wake on LAN 3. Ensure Wake on LAN feature is enabled in Setup/Configuration (see "Starting the Setup Utility program" on page 43) 4. Ensure network administrator is using correct MAC address 5. Ensure no interrupt or I/O address conflicts 6. Network adapter (advise network administrator of new MAC address) Dead computer. See "Power problems" on page 33. 1. AC/DC Power Adapter 2. System Board Diskette drive in-use light remains on or does not light when drive is active. 1. Diskette Drive 2. System Board 3. Diskette Drive Cable Flashing cursor with an otherwise blank display. 1. System Board 2. Primary Hard Disk Drive 3. Hard Disk Drive Cable Incorrect memory size during POST 1. Run the Memory tests 2. Memory Module 3. System Board "Insert a Diskette" icon appears with a known-good diagnostics diskette in the first 3.5-inch diskette drive. 1. System Board 2. Diskette Drive Cable 3. Network Adapter Intensity or color varies from left to right of characters and color bars 1. Display 2. Video adapter (if present) 3. System Board No power or fan not running 1. See "Power problems" on page 33. Non-system disk or disk error-type message with a known-good diagnostic diskette. 1. Diskette Drive 2. System Board 3. Diskette Drive Cable Other display symptoms not listed above (including blank or illegible display) 1. Display 2. System Board Power-on indicator or hard disk drive in-use light not on, but computer works correctly 1. Power switch/LED assembly 2. System Board Printer problems 1. Printer 2. System Board Chapter 7. Symptom-to-FRU index 65