Lenovo ThinkPad R40 English - Service and Troubleshooting Guide for R40, R40e - Page 50
Install a memory module, Turn off the computer, Attention
View all Lenovo ThinkPad R40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Install a memory module Install a memory module To install the DIMM, do the following: 1. Turn off the computer; then disconnect the ac adapter and all cables from the computer. 2. Close the computer display, and turn it over. 3. Remove the battery. 4. Loosen the screw on the memory slot cover; then remove the cover. If the SO-DIMM is already in the memory slot, remove it to make room for the new one by pressing out on the latches on both edges of the socket at the same time. Be sure to save it for future use. 5. Find the notch on the side of the SO-DIMM. Attention: To avoid damaging the SO-DIMM, do not touch its contact edge. 6. With the notched end of the SO-DIMM toward the right side of the socket, insert the SO-DIMM into the socket at an angle of about 20 degrees 1 ; then press it firmly 2 . 2 1 2 1 20 38 ThinkPad® R40 Series Service and Troubleshooting Guide