Lenovo ThinkPad i Series 1300 ThinkPad 130, 1200, 1300 - Hardware Maintenance - Page 51
Beep Symptoms
View all Lenovo ThinkPad i Series 1300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Error Code Message FRU/Action in Sequence 071 CMOS Battery v Backup battery (RTC Bad battery) v Enter BIOS Utility and execute ″Load Setup Default Settings″; then reboot the system. v System board 072 CMOS Checksum v Enter BIOS Utility and Error execute ″Load Setup Default Settings″; then reboot the system. v Backup battery (RTC battery) v System board 110 Incorrect v Set SW1 Pin 4 (Check Password Specified, System Password) to ″0″. Halted. v Enter BIOS Utility and clear password. v Set SW1 Pin 4 (Check Password) to ″1″. 252 VPD Checksum v Run ThinkPad Hardware Error Maintenance Diskette. v Input correct data. Beep Symptoms Symptom/Error Five short beeps and then system shut down without any message on screen One long beep and one short beep (In-proper speed DIMM module (66MHz) be inserted.) FRU/Action in Sequence v Battery power critical low (Connect the AC adapter or install a fully charged battery.) v Battery assembly. v DIMM v System board ThinkPad i Series 1200/1300 41