Lenovo ThinkPad i Series 1300 ThinkPad 130, 1200, 1300 - Hardware Maintenance - Page 55
Power Management-Related Symptoms, Peripheral-Device-Related Symptoms
View all Lenovo ThinkPad i Series 1300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Power Management-Related Symptoms Symptom/Error FRU/Action in Sequence The system doesn't enter v Go to "Hibernation mode" on hibernation mode. page 29. v Boot an operating system and press Fn+F4 and see if the computer enters hibernation mode. v Keyboard v Hard disk drive connection board v Hard disk drive v System board The system doesn't resume from hibernation mode. v Go to "Hibernation mode" on page 29. v Hard disk drive connection board v Hard disk drive v System board The system doesn't enter v Lid switch into or resume from sleep mode after closing v System board the LCD. System configuration does not match the installed devices. v Enter BIOS Utility and execute ″Load Setup Default Settings″; then reboot the system. v Reseat Hard disk/diskette/CD-ROM drive connector. System hangs intermittently. v Reseat hard disk/diskette/CD-ROM drive connector. v Fan ASM (go to "FRU tests" on page 98). v System board Peripheral-Device-Related Symptoms Symptom/Error FRU/Action in Sequence External display does not v Both display mode, press Fn+F7. work correctly. v System board Printer problems. v Run printer self-test. v Printer driver v Printer cable v Ensure that ″Parallel Port″ in the ″Onboard Devices Configuration″ menu of the BIOS Utility is correctly set. v System board ThinkPad i Series 1200/1300 45