Lexmark 4600 T64x - Setup Guide - Page 20
If you have additional drawers, place them on top of any installed drawer.
View all Lexmark 4600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Low profile stand setup Installing a 250- or 500-sheet drawer The 250- or 500-sheet drawer attaches under the printer and optional duplex unit. The printer automatically recognizes any drawer that is installed. A drawer consists of a tray and a support unit. The 250- and the 500-sheet drawers are installed the same way. 1 Remove the tray from the support unit. Remove all packing material and tape from the support unit and the tray. 2 Place the tray in the support unit. 3 Place the support unit on the stand. You can attach a label to the tray to indicate the tray number. Labels 4 If you have additional drawers, place them on top of any installed drawer. The tab, round peg, and square hole on top of any drawer help you position the duplex unit so the edges are aligned properly. Make sure it is securely in place. Tab Square hole Round peg Installing a 250- or 500-sheet drawer 19