Lexmark 4600 T64x - Setup Guide - Page 41

Installing an interfacecard and cable, Warning

Get Lexmark 4600 PDF manuals and user guides View all Lexmark 4600 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 41 highlights

Installing printer memory or option cards Installing an interface card and cable Warning: Interface cards are easily damaged by static electricity. Touch something metal such as the printer frame before you touch an interface card. 1 Locate the card connectors on the system board. 2 Remove the screw and the cover plate closest to the system board, and save them. 3 Unpack the scanner interface card and cable. Save the packaging materials. a Connect the USB interconnect cable to the system board. b Connect the USB interconnect cable to the card. 4 Align the connection points on the card with the connector on the system board, and push the card firmly up into the system board connector. Install the card in the open slot closest to the system board. 5 Insert the screw saved from the cover plate (or the extra screw shipped with the card). 6 Tighten the screw to secure the card. Screw Cover plate USB interconnect cable Installing an interface card and cable 40

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
Installing an interface card and cable
40
Installing printer memory or option cards
Installing an interface card and cable
Warning:
Interface cards are easily damaged by static electricity. Touch something metal such as the printer
frame before you touch an interface card.
1
Locate the card connectors on the system board.
2
Remove the screw and the cover plate closest to the system board, and save them.
3
Unpack the scanner interface card and cable. Save the packaging materials.
a
Connect the USB interconnect cable to the system board.
b
Connect the USB interconnect cable to the card.
4
Align the connection points on the card with the connector on the system board, and push the card firmly up into
the system board connector.
Install the card in the open slot closest to the system board.
5
Insert the screw saved from the cover plate (or the extra screw shipped with the card).
6
Tighten the screw to secure the card.
Screw
Cover plate
USB interconnect cable