Lexmark 4600 T64x - Setup Guide - Page 29

5 Scanner stand setup CAUTION: Floor-mounted configurations require additional furniture for stability. You must use either a printer stand or caster base if you are using a 2000-sheet drawer. Certain other configurations also must have a caster base. More information is available on our Lexmark Web site at www.lexmark.com/multifunctionprinters. This chapter includes information on setting up the MFP option with a scanner stand. To assemble this option, you should have the following components: • Scanner stand (part number 16C0700) • Printer • 4600 MFP option (scanner) You may also have the following: • Caster base • Low profile stand • Optional drawers • Optional duplex unit • Printer memory or option cards • Output options If you do not have an option listed here, you can skip that portion of the setup and continue to the next task. The setup for this portion of the book covers: 1 Positioning the scanner stand 2 Installing output options Positioning the scanner stand Remove the scanner stand from the box, and remove any packaging. Position the scanner stand in the location selected for the MFP, and then go to Installing output options on page 29. Scanner stand setup 28