Lexmark 736dn User's Guide - Page 116

Menu item Baud 1200 2400 4800 9600 19200 38400 57600 115200 138200 172800 230400 345600 Data Bits 7 8 Parity Even Odd None Ignore Honor DSR On Off Description Specifies the rate at which data can be received through the serial port Notes: • 9600 is the factory default setting. • 138200, 172800, 230400, and 345600 baud rates are only displayed in the Standard Serial menu. These settings do not appear in the Serial Option 1, Serial Option 2, or Serial Option 3 menus. Specifies the number of data bits that are sent in each transmission frame Note: 8 is the factory default setting. Sets the parity for serial input and output data frames Note: None is the factory default setting. Determines whether the printer uses the DSR Signal. DSR is a handshaking signal used by most serial cables. Notes: • Off is the factory default setting. • The serial port uses DSR to distinguish data sent by the computer from data created by electrical noise in the serial cable. The electrical noise can cause stray characters to print. Select On to prevent stray characters from printing. SMTP Setup menu Use the following menu to configure the SMTP server. Menu item Primary SMTP Gateway Primary SMTP Gateway Port Secondary SMTP Gateway Secondary SMTP Gateway Port SMTP Timeout 5-30 Reply Address Description Specifies SMTP server port information Note: 25 is the default SMTP gateway port. Range is 1-65536. Specifies the amount of time in seconds before the server stops trying to send the e-mail Note: 30 seconds is the factory default setting. Specifies a reply address of up to 128 characters in e-mail sent by the printer Understanding printer menus 116