Lexmark 736dn User's Guide - Page 152
Flash full, 53 Unformatted flash detected, 54 Network <x> software error
UPC - 734646086097
View all Lexmark 736dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 152 highlights
52 Flash full • Press the down arrow button until Continue appears, and then press to clear the message and continue printing. Downloaded fonts and macros not previously stored in flash memory are deleted. • Delete fonts, macros, and other data stored in flash memory. • Upgrade to a larger capacity flash memory card. 53 Unformatted flash detected • Press the down arrow button until Continue appears, and then press to stop the defragment operation and continue printing. • Format the flash memory. If the error message remains, the flash memory may be defective and require replacing. 54 Network software error • Press the down arrow button until Continue appears, and then press • Turn the printer power off and then back on to reset the printer. • Upgrade (flash) the network firmware in the printer or print server. to continue printing. 54 Serial option error • Check that the serial cable is connected correctly and is the proper one for the serial port. • Check that the serial interface parameters (protocol, baud, parity, and data bits) are set correctly on the printer and host computer. • Press the down arrow button until Continue appears, and then press to continue printing. • Turn the printer power off and then back on to reset the printer. 54 Standard network software error • Press the down arrow button until Continue appears, and then press • Turn the printer power off and then back on to reset the printer. • Upgrade (flash) the network firmware in the printer or print server. to continue printing. 55 Unsupported option in slot 1 Turn the printer power off. 2 Unplug the power cord from the wall outlet. 3 Remove the unsupported optional interface card or internal print server from the printer system board. 4 Connect the power cord to a properly grounded outlet. 5 Turn the printer power back on. 56 Parallel port disabled • Press the down arrow button until Continue appears, and then press The printer discards any data received through the parallel port. • Make sure the Parallel Buffer menu item is not set to Disabled. to clear the message. Understanding printer messages 152