Lexmark 736dn User's Guide - Page 153
Serial port <x> disabled, 56 Standard USB port disabled, 57 Configuration change
UPC - 734646086097
View all Lexmark 736dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 153 highlights
56 Serial port disabled • Press the down arrow button until Continue appears, and then press The printer discards any data received through the serial port. • Make sure the Serial Buffer menu item is not set to Disabled. to clear the message. 56 Standard USB port disabled • Press the down arrow button until Continue appears, and then press The printer discards any data received through the USB port. • Make sure the USB Buffer menu item is not set to Disabled. to clear the message. 56 USB port disabled • Press the down arrow button until Continue appears, and then press The printer discards any data received through the USB port. • Make sure the USB Buffer menu item is not set to Disabled. to clear the message. 57 Configuration change, held jobs were not restored Press the down arrow button until Continue appears, and then press to clear the message. 58 Too many flash options installed 1 Turn the printer power off. 2 Unplug the power cord from the wall outlet. 3 Remove the excess flash memory. 4 Connect the power cord to a properly grounded outlet. 5 Turn the printer power back on. 58 Too many trays attached 1 Turn the printer power off. 2 Unplug the power cord from the wall outlet. Note: Optional trays lock together when stacked. Remove stacked trays one at a time from the top down. 3 Remove the additional trays. 4 Connect the power cord to a properly grounded outlet. 5 Turn the printer power back on. 61 Remove defective hard disk • Press the down arrow button until Continue appears, and then press to clear the message and continue printing. • Install a different hard disk before performing any operations that require a hard disk. Understanding printer messages 153