Lexmark 736dn User's Guide - Page 187
Print is too light, Repeating defects, Cause, Solution
UPC - 734646086097
View all Lexmark 736dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 187 highlights
Print is too light Cause Solution Printer may not have recalibrated recently. Perform Color Adjust from the Quality menu. Toner Darkness setting is too light, RGB Brightness setting is too bright, or RGB Contrast setting is too high. • Select a different Toner Darkness setting, RGB Brightness setting, or RGB Contrast setting from Print Properties before sending the job to print. • Adjust the color quality settings in the Quality menu. You are using paper that does not meet the printer specifications. • Load paper from a new package. • Avoid textured paper with rough finishes. • Make sure the paper you load in the trays is not damp. • Make sure the Paper Type and Paper Weight settings match the type of paper that you are using. Color Saver is On. Turn Color Saver off in the Quality menu. Toner is low. Replace the toner cartridge. Toner cartridge is worn or defective. Repeating defects Cause Solution If marks occur repeatedly in only one color and multiple times on a page: A toner cartridge is defective. Replace the toner cartridge if the defects occur every: • 33.0 mm (1.30 in.) • 35.3 mm (1.39 in.) A photoconductor is defective. Replace the photoconductor if the defects occur every: • 28.3 mm (1.11 in.) • 72.4 mm (2.85 in.) If marks occur down the page repeatedly in all colors: The fuser is defective. Replace the fuser if the defects occur every: • 47.4 mm (1.87 in.) • 94.8 mm (3.73 in.) • 113.0 mm (4.45 in.) Troubleshooting 187