Lexmark 736dn User's Guide - Page 53
Adjusting the brightness of the display, Using the printer control panel
UPC - 734646086097
View all Lexmark 736dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
3 Click Timeouts. 4 In the Power Saver box, increase or decrease the number of minutes you want the printer to wait before it enters Power Saver mode. 5 Click Submit. Using the printer control panel 1 Make sure the printer is on and Ready appears. 2 Press . 3 Press the arrow buttons until Settings appears, and then press . 4 Press the arrow buttons until General Settings appears, and then press . 5 Press the arrow buttons until Timeouts appears, and then press . 6 Press the arrow buttons until Power Saver appears, and then press . 7 Press the arrow buttons to increase or decrease the number of minutes before the printer enters Power Saver mode, and then press . Adjusting the brightness of the display To save energy, or if you are having trouble reading your display, you can adjust the brightness of the display. Available settings range from 1-10. The factory default setting is 5. Using the Embedded Web Server 1 Type the printer IP address into the address field of your Web browser. Note: If you do not know the IP address of the printer, then print a network setup page and locate the IP address in the TCP/IP section. 2 Click Settings, and then click Utilities Menu. 3 In the LCD Brightness box, type in the brightness you want for your display. 4 Click Submit. Using the printer control panel 1 Make sure the printer is on and Ready appears. 2 Press . 3 Press the arrow buttons until Settings appears, and then press . 4 Press the arrow buttons until Utilities Menu appears, and then press . 5 Press the arrow buttons until LCD Brightness appears, and then press . 6 Press the arrow buttons to select a setting, and then press . Minimizing your printer's environmental impact 53