Lexmark C772 Menus and Messages Guide - Page 5

Using printer menus Understanding the printer operator panel The printer operator panel is a four line, back lit, gray scale display that can show both graphics and text. The Back, Menu, and Stop buttons are located to the left of the operator panel, the navigation buttons are located below the panel, and the numeric pad is located to the right of the panel. Back Menu Stop Indicator light Numeric pad USB Direct interface Navigation buttons Select button The use of the buttons and the layout of the display panel is described in the following table. Button Back Menu Stop Indicator light Function Press the Back button to return to the last screen viewed. Note: Changes made on a screen will not be applied if you press the Back button. Press the Menu button to open the menu index. Note: The printer must be in the Ready state to access the menu index. A message indicating the menus are unavailable will appear if the printer is not ready. Press the Stop button to stop the mechanical operation of the printer. After pressing Stop, the message Stopping is displayed. When the printer has stopped, the status line in the operator panel will show Stopped, and a list of options will appear. A two-toned green and red LED is used on the operator panel. The lights indicate whether the printer power is on, the printer is busy, idle, processing a job, or requires operator intervention. Status Off Solid green Flashing green Solid red Indicates Power is off. Printer is on, but idle. Printer is warming up, processing data, or printing a job. Operator intervention is required. 5