Lexmark C772 Menus and Messages Guide - Page 55

Understanding printer messages Message 38 Memory Full 39 Page is too complex to print 40 [color] invalid refill, change cartridge 50 PPDS font error 51 Defective flash detected 52 Not enough free space in flash memory for resources 53 Unformatted flash detected 54 Serial option error 54 Network software error 54 Standard network software error 55 Unsupported option in slot 56 Parallel port disabled 56 Serial port disabled 56 Standard USB port disabled Action • Press to clear the message and continue printing. The job may not print correctly. • Cancel the current job. • Install additional printer memory. • Press to clear the message and continue printing. The job may not print correctly. • Cancel the current job. • Install additional printer memory. Replace the specified toner cartridge, and close the front cover. • Press to clear the message and continue printing. The job may not print correctly. • Cancel the current job. Press to clear the message and continue printing. You must install different flash memory before you can download any resources to flash. • Press to clear the message and continue printing. Downloaded fonts and macros not previously stored in flash memory are deleted. • Delete fonts, macros, and other data stored on the flash memory. • Install a larger capacity flash memory card. Press to clear the message and continue printing. You must format the flash memory before you can store any resources on it. If the error message remains, the flash memory may be defective and require replacing. • Make sure the serial link is set up correctly, and you are using the appropriate cable. • Make sure the serial interface parameters (protocol, baud, parity, and data bits) are set correctly on the printer and host computer. • Press to clear the message and continue printing. The job may not print correctly. • Turn the printer off and then on to reset the printer. • Press to clear the message and continue printing. The job may not print correctly. • Program new firmware for the network interface. • Reset the printer. 1 Turn the printer off. 2 Remove the unsupported option. 3 Turn the printer on. • Press to clear the message. The printer discards any data received through the parallel port. • Make sure the Parallel Buffer menu item is not set to Disabled. • Press to clear the message. The printer discards any data received through the serial port. • Make sure the Serial Buffer menu item is not set to Disabled. • Press to clear the message. The printer discards any data received through the USB port. • Make sure the USB Buffer menu item is not set to Disabled. 55