Lexmark CX417 User Guide - Page 259

Troubleshooting 259 3 Remove the extra trays. 4 Connect the power cord to a properly grounded electrical outlet. 5 Turn the printer back on. [Type] imaging kit low [84.xy] Note: The type can be a black imaging kit, or a black and color imaging kit. You may need to order an imaging kit. If necessary, select Continue on the printer control panel to clear the message and continue printing. For non‑touch‑screen printer models, press to confirm. [Type] imaging kit nearly low [84.xy] Note: The type can be a black imaging kit, or a black and color imaging kit. If necessary, select Continue on the printer control panel to clear the message and continue printing. For non‑touch‑screen printer models, press to confirm. [Type] imaging kit very low, [x] estimated pages remain [84.xy] Note: The type can be a black imaging kit, or a black and color imaging kit. You may need to replace the imaging kit very soon. For more information, see the "Replacing supplies" section of the User's Guide. If necessary, select Continue on the printer control panel to clear the message and continue printing. For non‑touch‑screen printer models, press to confirm. Unformatted flash detected [53] Try one or more of the following: • From the printer control, select Continue to stop the defragmentation and continue printing. For non‑touch‑screen printer models, press • Format the flash memory. to confirm. Note: If the error message remains, then the flash memory may be defective and need to be replaced. Waste toner bottle nearly full [82.xy] You may need to order a waste toner bottle. If necessary, select Continue on the printer control panel to clear the message and continue printing. For non‑touch‑screen printer models, press to confirm. Weblink server not set up. Contact system administrator. From the printer control panel, press to clear the message.