Lexmark CX417 User Guide - Page 305

Troubleshooting 305 Action Yes Step 7 The problem is Turn off the printer, then wait for about 10 seconds, and then turn solved. the printer back on. Are the printer and scanner working? No Contact customer support. Scan job was not successful Action Yes Step 1 Go to step 2. Check the cable connections. Make sure the Ethernet or USB cable is securely connected to the computer and the printer. No Connect the cables properly. Are the cables securely connected? Step 2 Check if the file name is already in use. Change the file name. Go to step 3. Is the file name already in use? Step 3 Close the file you are Go to step 4. Check if the document or photo you want to scan is open in another scanning. application or being used by another user. Is the file you want to scan open by another application or user? Step 4 Contact customer Check if either the Append time stamp or the Overwrite existing support. file check box is selected in the destination configuration settings. Is the Append time stamp or Overwrite existing file check box selected in the destination configuration settings? Select the Append time stamp or Overwrite existing file check box in the destination configuration settings. Scanner unit does not close Action Check if there are obstructions in the scanner unit. a Lift the scanner unit. b Remove any obstruction keeping the scanner unit open. c Lower the scanner unit. Did the scanner unit close correctly? Yes The problem is solved. No Contact customer support.