Lexmark CX922 Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 56

5.2.1.3 Lexmark MS82x, MX82x and MX62x Optional Finisher The optional finisher supports only one staple position. You can not physically change the position of the staple. The printer automatically rotates text before stapling when the finisher is installed. If necessary, reformat your job on the host with a different text orientation to avoid stapled sets that are hard to read. Refer to your printer or finisher documentation to determine the finishing support and staple location for various paper sizes. Finishing functions may not be applied to all paper sizes. Parameters in the printer file that affect stapling Printer device type *IPDS Output bin For Lexmark MS82x and Lexmark MX82x use 2 if only the optional finisher is installed. For Lexmark MS82x use 3 if optional finisher is installed on top of output expander. For Lexmark MS82x use 6 if optional finisher is installed on top of 4-Bin mailbox. For Lexmark MX62x use 2 if optional finisher is installed. Corner staple *DEVD or *TOPLEFT The *DEVD staple position is the top left. Specifying any other setting may cause an exception to be reported to the host. Drawing of staple placement *DEVD *TOPLEFT Text Text text text text text text. Text shown with 0 degree rotation specified in IPDS job Short-edge fed paper, leading edge 56