Lexmark CX922 Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 63

Drawing of staple placement for simplex form definitions FC0010 Text Text text text text text Text shown with 0 degree rotation specified in IPDS job FE0010 Long-edge fed paper, leading edge FE0010 Text shown with 0 degree rotation specified in IPDS job Text Text text text text text text. FC0010 Short-edge fed paper, leading edge 5.3.1.5 Lexmark CS92x and CX92x Optional Advanced Finisher Functions The 3-Bin Floor Finisher supports Corner staple, Dual staple (IPDS Edge stitch with 2 staples), Center Fold (IPDS Center Fold-in), and Saddle staple (IPDS Saddle stitch-in). The printer automatically rotates the text 180 degrees for short-edge fed paper and 90 degrees for long-edge fed paper. If necessary, reformat your job on the host with a different text orientation to avoid stapled or folded sets that are hard to read. Finishing functions may not be applied to all paper sizes. Refer to your printer or finisher documentation to determine the finishing support and staple location for various paper sizes. How to specify the Printer File parameters for Center Fold, and Saddle staple is shown below. Examples for Corner staple, Dual staple and Double Dual staple are in section 5.2.1.1 on page 52. 5.3.1.5.1 Saddle Staple (IPDS Saddle stitch-in) Saddle staple may be specified using various application programs using the Operation Type Saddle stitchin (X'12' in the IPDS data stream). Saddle stitch-in folds the paper inward (printed side in) along the centerline and places two staples in the centerline fold. Saddle stitch-in is only supported on selected paper sizes. Refer to your printer or finisher documentation for the paper sizes supported. Saddle stitch-in is only supported on Letter and A4 paper when the paper is loaded for Short Edge Fed (SEF) printing. All jobs specifying Saddle stitch-in will be routed to the finisher physical bin 3. Saddle 63