Lexmark E450DN Service Manual - Page 101
Controller card removal, Right side cover removal
View all Lexmark E450DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
4512-630 Controller card removal Warning: • Always touch a ground before touching the card. • Handle the card carefully by the edges. • Never replace the operator panel and controller card at the same time without a successful POR in between. 1. Remove the right side cover. See"Right side cover removal" on page 4-5. 2. Remove the controller card cover. 3. Disconnect all the cables from the controller card, and remove cables from the shield housing. Warning: Do not replace the controller card and the operator panel at the same time. Each card contains the printer settings. When either of these cards is new, it obtains its settings from the other card. Critical factory settings are lost when both are new and replaced at the same time. 4. Remove the four screws (A) that are securing the controller card. Repair information 4-13