Lexmark E450DN Service Manual - Page 115
Re-installation note, CAUTION
View all Lexmark E450DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 115 highlights
6. Rotate the assembly, and unplug the remaining cables. 4512-630 7. Remove the assembly. Re-installation note: When re-installing the LVPS/HVPS assembly: • Be sure to locate the rear flange of the card bracket inside of the shield prior to rotating the card assembly into final position. CAUTION: Make sure that the mylar card is located inside the overlapping flanges to avoid damage to the printer. • It is easy for the cables to become pinched during re-installation. Make sure that the cables are free during re-installation. Repair information 4-27
Repair information
4-27
4512-630
6.
Rotate the assembly, and unplug the remaining cables.
7.
Remove the assembly.
Re-installation note:
When re-installing the LVPS/HVPS assembly:
•
Be sure to locate the rear flange of the card bracket inside of the shield prior to rotating the card assembly
into final position.
•
It is easy for the cables to become pinched during re-installation. Make sure that the cables are free during
re-installation.
CAUTION:
Make sure that the mylar card is located inside the overlapping
flanges to avoid damage to the printer.