Lexmark E450DN Service Manual - Page 99
Auto comp drive shaft assembly removal, Auto comp clutch removal
View all Lexmark E450DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
4512-630 Auto comp drive shaft assembly removal 1. Remove the auto comp clutch. See "Auto comp clutch removal" on page 3-10. 2. Use a spring hook or a small screwdriver to dislodge the arm of the shaft bushing, and rotate the arm counterclockwise as far as it will go. 3. With the bushing aligned with the frame opening for clearance, unsnap the shaft from the ACM. 4. Remove the auto comp drive shaft assembly. 5. Use a screwdriver to align the ACM with the shaft bearing to help in installation. Repair information 4-11
Repair information
4-11
4512-630
Auto comp drive shaft assembly removal
1.
Remove the auto comp clutch. See
“Auto comp clutch removal” on page 3-10
.
2.
Use a spring hook or a small screwdriver to dislodge the arm of the shaft bushing, and rotate the arm
counterclockwise as far as it will go.
3.
With the bushing aligned with the frame opening for clearance, unsnap the shaft from the ACM.
4.
Remove the auto comp drive shaft assembly.
5.
Use a screwdriver to align the ACM with the shaft bearing to help in installation.